Brother DCP-8085DN review
With an automatic duplexer, a 50-page automatic document feeder (ADF) and a quoted print speed of 30ppm, Brother's DCP-8085DN mono laser MFP can do almost anything you'll need in a small office - as long as it's in black and white.
It has a 250-page paper tray and its specialist media tray handles media up to 163gsm, although it creased some of our envelopes.
The installer detected the MFP on our network, installed its PCL3 driver and set up our PC as a default location for one-button scanning. A five-line LCD screen lets you configure everything from default print quality to power-saving. An ugly but functional web interface duplicates the menu options and makes it easy to restrict access to the printer. The driver supports secure printing: if you set a PIN before sending a document to the printer, the MFP won't print it until you type the code into its keypad. Scans can also be secured. The printer has 64MB of RAM, but you can upgrade it to a maximum of 576MB.
The DCP-8085DN has a native resolution of 1,200dpi. There's also an HQ1200 setting, which is actually 600dpi with resolution enhancement, but it produced faster, better-looking graphical prints than true 1,200dpi. We performed our standard tests at 600dpi. Complex graphics were accurately shaded and thin lines and curves were unusually smooth. Text at 8pt and above was very sharp, although some tiny fonts looked spidery, even at 1,200dpi. Plain text printed at 25.9ppm and our complex greyscale prints emerged at an impressive 24.8ppm. Ten sides of duplex text printed in 53 seconds at 10.1ppm.
A button on the front of the device lets you scan to networked PCs, PictBridge or an FTP server. You can send scanned documents to an email client or image editor, or convert them to text and open them in Notepad. The ADF handles both simplex and duplex scanning. The simplistic PC interface lacks auto-cropping or colour adjustment features, but it's easy to use and stays open between scans. The maximum optical resolution for scans is 600x2,400dpi. However, you can't scan at this resolution, but must select a 'square' resolution, such as 600x600 or 2,400x2,400dpi. The shorter axis is then interpolated to match the long axis of the scan.
Scan quality was good, with sharp detail and consistent colour that produced accurate shading and natural flesh tones. High-resolution images were smooth and precise, with no graininess or significant banding. Scan speeds were quick only at low resolutions. While a 150dpi A4 flatbed scan took just 14 seconds, we waited 35 seconds for the same scan at 300dpi and 42 seconds for a 600dpi scan of a 6x4in photo. A 10-page colour simplex ADF scan at 300dpi took five minutes.
The DCP-8085DN is a capable copier, but we had to set its brightness to maximum to prevent murky copies. A standard copy from the plate took 10 seconds and 10 single-sided sheets copied from the ADF took just 29 seconds. A single duplex copy emerged in 32 seconds.
It's economical to run, with costs of just 1.2p per page if you buy Brother's 8,000-page high-yield toner cartridges. However, replacing the 25,000-page drum unit costs an extra £110. Even with the cost of the drum, each page costs just 1.6p - fairly cheap by current standards. The total cost of ownership for three years of medium use (27,000 pages) is £641.
The DCP-8085DN is competitively priced for what it does, but it's still expensive compared with less well-equipped mono laser MFPs. We liked its security features and fast duplex scanning, printing and copying. If you need one device to handle all the printing and scanning for a small office workgroup or a very demanding home office, this is worth buying. If you want something smaller, we recommend Brother's DCP-7030 instead.
Basic Specifications | |
|---|---|
| Rating | **** |
| Maximum native print resolution | 1,200dpi |
| Max optical resolution | 600x2,400dpi |
| Output bit depth | 48-bit |
Quoted Speeds | |
| Quoted speed, mono A4 | 30ppm |
Tested Print Speeds | |
| Time for two greyscale 10x8in photos 1.1 | 19s |
| Time for six greyscale 6x4in photos 1.0 | 20s |
Physical and Environmental | |
| Standard printer interfaces | USB, PictBridge USB, 10/100 Ethernet, parallel |
| Optional printer interfaces | none |
| Size | 475x531x451mm |
| Weight | 18.4kg |
| Noise (in normal use) | 56dB(A) |
| Power consumption standby | 10W |
| Power consumption idle | 11W |
| Power consumption active | 940W |
Paper Handling | |
| Maximum paper size | A4/legal |
| Maximum paper weight | 163gsm |
| Standard paper inputs | 1 |
| Standard paper input capacity | 250 |
| Maximum paper inputs | 2 |
| Maximum paper input capacity | 500 |
| Duplex (code, cost if option) | Yes |
General | |
| Printer technology | mono laser |
| Language(s) | PCL6, BR-Script 3 (PostScript 3 emulation), IBM Pro-Printer XL, Epson FX-850 |
| Supported operating systems | Windows 2000/XP/XP-64/2003/Vista/Vista-64, Mac OS X 10.3.9+, Linux |
| Maximum printer memory | 576MB |
| Other laser features and options | none |
Buying Information | |
| Price | £356 |
| Consumable parts and prices | 3,000 page TN-3230 toner, £64, 8,000 page TN-3280 toner, £95, 25,000 page DR-3200 drum unit, £110 |
| Price per mono A4 page | 1.20p |
| Price of 2nd paper cassette | 250-sheet LT5300, £82 |
| Warranty | three years onsite (with registration) |
| Supplier | http://www.ilgs.co.uk |
| Details | www.brother.co.uk |
Tested Scan Speeds | |
| Full scan area preview | 13s |
| A4 document at 150dpi | 14s |
| A4 document at 300dpi | 35s |
| 6x4in photo at 600dpi | 42s |
| 6x4in photo at 1200dpi | 1m 16s |
Tested Copy Speeds | |
| Time for single A4 mono copy 1.0 | 10s |
| Time for 10 A4 copies using feeder 2.0 | 29s |
Copy Features | |
| Maximum number of copies | 99 |
| Max mono copy resolution | 1,200x600dpi |
Fax Features | |
| Max mono fax resolution | N/A |
| Fax memory (maximum mono pages) | N/A |
